Technology (Part Four) - by Moses

C.R.T.C- The Canadian Radio and Television Commission

Every phone call is taped, every single call. Monitoring is usually conducted by at least 7 countries, on every single phone call. Believe it, or not, actions are not made unilaterally. The C.R.T.C and F.C.C (Federal Communication Commission) are around trying to unify every American, pronounced on our Radio’s, Television’s, and Telephone’s.
On long distance phone calls, arrangements are made as to who are able to monitor the call. For example, on an ‘Ole’ Phone Card, they may have sublet the line to Spain, Portugal, Mexico, Brazil, Argentina, Chile, and Angolan telecommunication specialists for monitoring purposes. These specialists interpret and transpose the conversation, each body independent of each-other. Likewise a Bell Calling Card sublet to Canada, U.S.A, Ethiopia, Sweden, Israel, Saudi Arabia and China. Here in lye’s the problem with this issue. Should I be unaware of how I’m being interpreted on a phone call (based on telecommunication analysis), who is going to G-d playing Judge and jury with respect to my Soul, Culture, Freedoms, Cause and Effects, and Consequences regarding having a chat that begins ‘How are you’.
The telephone call is the line of communication. What about the phone itself, the satellite, the Relay Station….? (This is why I use a secure Digital Workstation that has no ties into the internet or any other computer for that matter).
Should my phone have exclusive rights to Canada, and the call is monitored by Canada, Sweden, Ethiopia, Iceland, Israel, and Saudi Arabia, does the Canadian Government really have ultimate say as to how the call was perceived (interpreted), after the fact? Reference - ‘Enemy of the State’ – ‘Who Monitors the Monitors?’


Abstract Philosophy

People – Tribe – Nation – Satellite (monitor) – communication – district – city – country – continent – planet (earth)

Principles

1. Each house is a nation, hence ‘nuclear families’, landlords. Nations are made up of people, some refer to as G-ds / Role models / Idols.
2. To monitor each telephone / computer (any communication device for that matter), there is an area code followed by an exchange, followed by a 4-digit identification code. In Ground telecommunications this holds true. In cellular telecommunications there is also a chip that stores the location (the frequency), and, transmits to a relay station the aforementioned data. In Satellite telecommunications, the technology is more sophisticated and a person can be tracked simply by answering their phone, as there is a G.P.S (Ground Frequency) tracking device in the phone itself. Likewise an independent work-station (commonly referred to as consulting) is a search engine upon copyright.
3. To access these stations through a Local Area Network or Wide Area Network, software applications are used - commonly referred to as the intranet (in the Private Sector), and the internet (in the Public sector).
4. Amplitude Modulation (A.M) –White Noise (Equal energy per frequency), Pink Noise (Equal energy per octave). Frequency Modulation (F.M) – altering time, commonly referred to as Bandwidth.
5. Frequencies that are defined (a specific series of events over an exact moment) – motion/in-motion, compression/rarefaction also defined as Hertz (the scientist who discovered this premise). Where do they go? Within each universe there are many galaxies. We are grounded to prevent dementia (exploration outside the known Universe), this is our depth perception, also known as Leagues (a Naval term), Co-Ordinates (X Y Z) – Space and time travel.



Capacitors and Current Flow (A/C-D/C) and Ohm’s Law


A capacitor stores energy. It is measured in Wattage and at the release point it becomes an amplifier. For example, a light bulb takes in 60 watts (or 100 watts for that matter). The Amps (measured in Wattage) from the light socket is varied depending on the design. A/C is alternating current (invented by Tesla and developed by Marconi) and is measured at 60Hz for the purpose of safety regulations in North American standards. D/C is direct current (developed by Watts, Alexander Graham Bell, and Benjamin Franklin) and is measured at 110Hz for the purpose of safety regulations in European standards. Once the current leaves the capacitor it is necessary to transfer it through resisters for safety purposes as the feed is dangerous to take in. There are elements of tolerance used in a resister to prevent accidental electrocution. i.e. – Shocker (a movie depicting a man who is so power hungry that he feeds off other peoples’ energy rendering them powerless). Examples of tolerance are Bronze, Silver, Gold, Platinum – Copper (the least finite/greatest amount of tolerance), and Crystal (the greatest finite/least amount of tolerance). Tolerance is also referred to as margin or Q (trajectory). A capacitor is capable of distributing the current into groupings in the Billions, Trillions, Zillions, Maxi-Zillions, and Terra-Zillions. This is why sample and hold circuitry is used in high performance professional application software, so as to prevent a computer from crashing – these are called chips – also known as silicone, invented by the scientist Farad.
In Ohm’s law Voltage = Amps x Resistance. Voltage is synonymous with current (electricity), resistance is impedance (also known as tolerance and measured in Ohms), and, amps are also referred to as watts, or power. Therefore the Power Law (Watts Law) is Amps = Voltage/ Impedance. Distance = Hertz x Voltage/Impedance (also known as time x speed).